How To Program Fios Voice Remote6 min read

Reading Time: 4 minutes

The Fios voice remote is a device that you can use to control your TV with your voice. To program the remote, you first need to find the remote’s code. You can find the code by looking in your TV’s user manual or by visiting verizon.com/fiosremotes. Once you have the code, you can program the remote by following these steps:

1. Turn on your TV and your Fios voice remote.

2. Point the remote at your TV and press and hold the MUTE and SELECT buttons.

3. The word "TV" should start flashing on the remote’s screen.

4. Enter the code for your TV by pressing the appropriate buttons.

5. The word "TV" should stop flashing and the "OK" button will light up.

6. Release the SELECT and MUTE buttons.

7. The remote is now programmed.

How do I program my Fios remote to my TV?

Programming your Fios remote to your TV is a relatively simple process. You can do it in a few easy steps:

1. Turn on your TV and find the input or channel that your Fios box is connected to.

2. Hold down the power button on your Fios remote for three seconds, until the red light flashes.

3. Use the number buttons on the remote to enter the three-digit code for your TV brand.

4. Press the "OK" button on the remote.

5. The TV will switch to the input or channel that your Fios box is connected to.

How do I reset my Fios voice remote?

If you’re having trouble getting your Fios voice remote to work, there might be a way to reset it. Here’s how to do that:

First, locate the reset button on the back of the remote. It’s a small, circular button that’s usually located near the bottom.

Next, use a paperclip or something similar to push the reset button.

Hold the button down for a few seconds, until the remote powers off.

Then, power the remote back on by pressing the power button.

You should now be able to control your TV using your voice.

Why is my voice command not working on my Fios remote?

Your voice commands might not be working on your Fios remote for a few reasons. One possibility is that you might not be speaking into the remote correctly. Make sure to hold the remote close to your mouth and speak directly into the microphone on the remote.

Another possibility is that your remote might not be properly calibrated. To calibrate your remote, press and hold the "Setup" button on the remote until the light on the remote turns green. Then, say "TV on" or "TV off." If the light on the remote does not turn green, the remote is not properly calibrated and you will need to contact Fios customer service for assistance.

Another possibility is that your Fios service might not be enabled for voice commands. To see if your Fios service is enabled for voice commands, press and hold the "Setup" button on the remote until the light on the remote turns green. Then, say "voice commands." If the light on the remote does not turn green, your Fios service is not enabled for voice commands and you will need to contact Fios customer service for assistance.

How do I reconnect my Verizon remote to my TV?

If you have a Verizon remote and you need to reconnect it to your TV, there are a few things you can do. First, you’ll want to make sure that your Verizon remote is programmed to operate your TV. To do this, press and hold the TV button on your remote. While holding the TV button, use the number buttons to enter the three-digit code for your TV. Once the code has been entered, release the TV button. Next, try pressing the power button on your remote. If your TV turns on, then your remote is properly programmed. If your TV does not turn on, then you’ll need to reprogram your remote.

If your remote is not properly programmed, you can reprogram it by following these steps:

1. Turn off your TV.

2. Turn off your cable box.

3. Unplug your TV and cable box from the power outlet.

4. Plug your TV back in to the power outlet.

5. Plug your cable box back in to the power outlet.

6. Turn on your TV.

7. Press the power button on your remote.

8. The remote should now be properly programmed.

Why won’t my Fios remote pair with my TV?

If you’re having trouble getting your Fios remote to control your TV, there are a few things you can try.

First, make sure the batteries in the remote are fresh. If they’re not, replace them.

Next, check to see if your TV is in the proper mode. Most TVs have a mode called "TV" or "VIDEO." In this mode, the TV will respond to the remote’s commands.

If your TV is in the proper mode and the batteries in the remote are fresh, there may be a problem with your remote. Try using another remote to see if it controls the TV. If it does, then the problem is with the remote. If it doesn’t, the problem is with the TV.

If you’ve tried all of these things and the remote still won’t control the TV, there may be a problem with the Fios equipment. Contact Fios support for assistance.

How do I pair the Voice Command remote control to my TV?

Pairing the Voice Command remote control to your TV is a very simple process. You will need to have the remote control and the TV within close proximity of each other, and both devices must be turned on.

First, press and hold the TV button on the remote control until the red light begins to blink. Then, press and hold the power button on the TV until it turns on. The TV should now be in pairing mode.

Next, locate the pairing button on the remote control. This is a small, circular button located near the top of the remote. Once the TV is in pairing mode, press the pairing button on the remote control.

The remote control and TV should now be paired. You can test the connection by pressing the TV button on the remote control. The TV should turn off.

How do I activate voice control remote?

If you have a voice control remote and you want to activate it, you first need to make sure that it is turned on. To do this, press and hold the voice control button on the remote until the voice control light turns on.

If the voice control light is on, you can now speak into the remote. Make sure that the TV is turned on and that the sound is turned up, then say "turn on" or "power on" to activate the TV.

You can also use voice control to change the channel, adjust the volume, and more. To learn more about what you can do with voice control, consult the user manual for your remote.